Dehydration melting of tonalites. Part I. Beginning of melting     

J. Singh  Wilhelm Johannes 《Contributions to Mineralogy and Petrology》1996,125(1):16-25

 The beginning of dehydration melting in the tonalite system (biotite-plagioclase-quartz) is investigated in the pressure range of 2–12 kbar. A special method consisting of surrounding a crystal of natural plagioclase (An₄₅) with a biotite-quartz mixture, and observing reactions at the plagioclase margin was employed for precise determination of the solidus for dehydration melting. The beginning of dehydration melting was worked out at 5 kbar for a range of compositions of biotite varying from iron-free phlogopite to iron-rich Ann₇₀, with and without titanium, fluorine and extra aluminium in the biotite. The dehydration melting of phlogopite + plagioclase (An₄₅) + quartz begins between 750 and 770°C at pressures of 2 and 5 kbar, at approximately 740°C at 8 kbar and between 700 and 730°C at 10 kbar. At 12 kbar, the first melts are observed at temperatures as low as 700°C. The data indicate an almost vertical dehydration melting solidus curve at low pressures which bends backward to lower temperatures at higher pressures (> 5 kbar). The new phases observed at pressures ≤ 10 kbar are melt + enstatite + clinopyroxene + potassium feldspar ± amphibole. In addition to these, zoisite was also observed at 12 kbar. With increasing temperature, phlogopite becomes enriched in aluminium and deficient in potassium. Substitution of octahedral magnesium by aluminium and titanium in the phlogopite, as well as substitution of hydroxyl by fluorine, have little effect on the beginning of dehydration melting temperatures in this system. The dehydration melting of biotite (Ann₅₀) + plagioclase (An₄₅) + quartz begins 50°C below that of phlogopite bearing starting composition. Solid reaction products are orthopyroxene + clinopyroxene + potassium feldspar ± amphibole. Epidote was also observed above 8 kbar, and garnet at 12 kbar (750°C). The experiments on the iron-bearing system performed at ≤ 5 kbar were buffered with NiNiO. The f _{O 2} in high pressure runs lies close to CoCoO. With the substitution of octahedral magnesium and iron by aluminium and titanium, and replacement of hydroxyl by fluorine in biotite, the beginning of dehydration melting temperatures in this system increase up to 780°C at 5 kbar, which is 70°C above the beginning of dehydration melting of the assemblage containing biotite (Ann₅₀) of ideal composition. The dehydration melting at 5 kbar in the more iron-rich Ann₇₀-bearing starting composition begins at 730°C, and in the Ann₂₅-bearing assemblage at 710°C. This indicates that quartz-biotite-plagioclase assemblages with intermediate compositions of biotite (Ann₂₅ and Ann₅₀) melt at lower temperatures as compared to those containing Fe-richer or Mg-richer biotites. This study shows that the dehydration melting of tonalites may begin at considerably lower temperatures than previously thought, especially at high pressures (>5 kbar). Received: 27 December 1995 / Accepted: 7 May 1996  相似文献   

Dehydration melting of tonalites. Part II. Composition of melts and solids   总被引：6，自引：0，他引：6  

J. Singh  Wilhelm Johannes 《Contributions to Mineralogy and Petrology》1996,125(1):26-44

 Dehydration melting of tonalitic compositions (phlogopite or biotite-plagioclase-quartz assemblages) is investigated within a temperature range of 700–1000°C and pressure range of 2–15 kbar. The solid reaction products in the case of the phlogopite-plagioclase(An₄₅)-quartz starting material are enstatite, clinopyroxene and potassium feldspar, with amphiboles occurring occasionally. At 12 kbar, zoisite is observed below 800°C, and garnet at 900°C. The reaction products of dehydration melting of the biotite (Ann₅₀)-plagioclase (An₄₅)-quartz assemblage are melt, orthopyroxene, clinopyroxene, amphibole and potassium feldspar. At pressures > 8 kbar and temperatures below 800°C, epidote is also formed. Almandine-rich garnet appears above 10 kbar at temperatures ≥ 750°C. The composition of melts is granitic to granodioritic, hence showing the importance of dehydration melting of tonalites for the formation of granitic melts and granulitic restites at pressure-temperature conditions within the continental crust. The melt compositions plot close to the cotectic line dividing the liquidus surfaces between quartz and potassium feldspar in the haplogranite system at 5 kbar and a _{H 2O} = 1. The composition of the melts changes with the composition of the starting material, temperature and pressure. With increasing temperature, the melt becomes enriched in Al₂O₃ and FeO+MgO. Potash in the melt is highest just when biotite disappears. The amount of CaO decreases up to 900°C at 5 kbar whereas at higher temperatures it increases as amphibole, clinopyroxene and more An-component dissolve in the melt. The Na₂O content of the melt increases slightly with increase in temperature. The composition of the melt at temperatures > 900°C approaches that of the starting assemblage. The melt fraction varies with composition and proportion of hydrous phases in the starting composition as well as temperature and pressure. With increasing modal biotite from 20 to 30 wt%, the melt proportion increases from 19.8 to 22.3 vol.% (850°C and 5 kbar). With increasing temperature from 800 to 950°C (at 5 kbar), the increase in melt fraction is from 11 to 25.8 vol.%. The effect of pressure on the melt fraction is observed to be relatively small and the melt proportion in the same assemblage decreases at 850°C from 19.8 vol.% at 5 kbar to 15.3 vol.% at 15 kbar. Selected experiments were reversed at 2 and 5 kbar to demonstrate that near equilibrium compositions were obtained in runs of longer duration. Received: 27 December 1995 / Accepted: 7 May 1996  相似文献   

Landslide hazard and risk assessment mapping of mountainous terrains - a case study from Kumaun Himalaya, India     

R. Anbalagan  Bhawani Singh 《Engineering Geology》1996,43(4):237-246

Landslides are studied systematically in order to evaluate the nature of hazard and the damages to the human life, land, roads, buildings and other properties. This can be expressed in terms of risk, which is a function of hazard probability and damage potential. A risk map will indicate the priorities for landslide hazard management. A new approach to risk assessment mapping using a risk assessment matrix (RAM) is presented.  相似文献   

Multiple episodes of tectonothermal processes in the Eastern Ghats granulite belt     

Santanu Kumar Bhowmik 《Journal of Earth System Science》1997,106(3):131-146

A suite of rocks from Borra Carbonate Granulite Complex (BCGC) in the Eastern Ghats granulite belt displays superposed structures and overprinted mineral assemblages that reveal multiple episodes of tectonothermal reworking of the complex under granulite facies condition. Five distinct episodes of deformation (D₁, D₂, D₃, D₄ and D₅) and four phases of metamorphism (M₁, M₂, M₃ and M₄) are recorded. The signature of the earliest tectonothermal event, D₁ is a gneissic foliation (S₁) denned by segregation of peak granulite facies mineral assemblages corresponding to prograde M₁ metamorphism. M₂ metamorphic overprint represents an episode of near-isobaric cooling of the complex under a static condition. D₂ represents an episode of ductile deformation manifested by isoclinal folding (F₂) and associated extensional structures, within a broad framework of coaxial bulk deformation. The present study reveals that D₂ took place subsequent to M₂ - Subsequent deformation, D₃, produced F₃ folds and also deformations of boudins formed during D₂. M₃, which is synchronous with F₃, represents a near isothermal decompression of the BCGC. This was followed by a weak structural readjustment (D₄), producing E-W cross folds. The latter was not, however, associated with any recognizable petrological reworking. In the terminal events, deformation (D₅) and mineral reactions (M₄) were localized along narrow intersecting shear zones. The latter acted as channelways for carbonic and still later hydrous fluid infiltration. The available thermobarometric data from BCGC and other areas of the Eastern Ghats belt reveal that reworking during M₂ and M₃ ensued in a thermally perturbed regime. The high thermal regime might also have persisted during carbonic fluid infiltration related to terminal reworking (M₄).  相似文献   

Effect of tunnel depth on modulus of deformation of rock mass   总被引：1，自引：2，他引：1  

M. Verman  B. Singh  M. N. Viladkar  J. L. Jethwa 《Rock Mechanics and Rock Engineering》1997,30(3):121-127

Summary Deformability of rock mass significantly influences its behaviour and is, therefore, an important consideration for the design of underground openings. The modulus of deformation of rock mass is, however, normally obtained from expensive and time-consuming uniaxial jacking tests, whose results often have a large scatter. An empirical correlation has, therefore, been proposed for a quick and inexpensive preliminary estimation of the modulus of deformation of rock mass on the basis of field instrumentation carried out in tunnels in India.  相似文献   

Seismicity around Dhamni Dam, Maharashtra, India     

B. K. Rastogi  P. Mandal  N. Kumar 《Pure and Applied Geophysics》1997,150(3-4):493-509

  相似文献   

Electron cyclotron waves in the presence of parallel electric fields in the Earth’s auroral plasma     

S. Kumar  S. K. Dixit  A. K. Gwal 《Annales Geophysicae》1997,15(1):24-28

The electron cyclotron waves that originate at low altitudes (<0.5 R_E) and observed by ground facilities have been studied in the presence of a weak parallel electric field in auroral magnetoplasma consisting of trapped energetic auroral electrons and cold background electrons of ionospheric origin. The model distribution for auroral trapped electrons is taken as Maxwellian ring distribution. An expression for the growth rate has been obtained in the presence of parallel electric field assuming that the real frequency in the whistler mode is not affected by the presence of the electric field. The results show that waves grow (or damp) in amplitude for a parallel (or antiparallel) electric field. The influence of the electric field is more pronounced at a shorter wavelength spectrum. An increase in population of energetic electrons increases the growth rate and thus, plays a significant role in the wave excitation process in the auroral regions.  相似文献   

Effect of class-interval size on entropy     

V. P. Singh 《Stochastic Environmental Research and Risk Assessment (SERRA)》1997,11(5):423-431

The value of Shannon entropy for a given set of data depends on the class interval chosen to compute the relative frequency of each class. For three data sets, expressed in dimensional as well as nondimensional form, the entropy value was computed for different class-interval sizes. Entropy was found to decrease with increasing class interval as well as with increasing sampling interval. It is suggested that these intervals should be selected with care.  相似文献   

Empirical Orthogonal Function (EOF) analysis of monsoon rainfall and satellite-observed outgoing long-wave radiation for Indian monsoon: a comparative study   总被引：3，自引：0，他引：3  

C. V. Singh 《Meteorology and Atmospheric Physics》2004,85(4):227-234

Summary The present study involves the use of Empirical Orthogonal Function (EOF) analysis/Principal Component Analysis (PCA) to compare the dominant rainfall patterns from normal rainfall records over India, coupled with the major modes of the Outgoing Long-wave Radiation (OLR) data for the period (1979–1988) during the monsoon period (June–September). To understand the intraseasonal and interannual variability of the monsoon rainfall, daily and seasonal anomalies have been obtained by using the (EOF) analysis. Importantly, pattern characteristics of seasonal monsoon rainfall covering 68 stations in India are highlighted.The purpose is to ascertain the nature of rainfall distribution over the Indian continent. Based on this, the percentage of variance for both the rainfall and OLR data is examined. OLR has a higher spatial coherence than rainfall. The first principal component of rainfall data shows high positive values, which are concentrated over northeast as well as southeast, whereas for the OLR, the area of large positive values is concentrated over northwest and lower value over south India apart from the Indian ocean. The first five principal components explain 92.20% of the total variance for the rainfall and 99.50% of the total variance for the outgoing long-wave radiation. The relationship between monsoon rainfall and Southern Oscillations has also been examined and for the Southern Oscillations, it is 0.69 for the monsoon season. The El-Niño events mostly occurred during Southern Oscillations, i.e. Walker circulation. It has been found that the average number of low pressure system/low pressure system days play an important role during active (flood) or inactive (drought) monsoon year, but low pressure system days play more important role in comparison to low pressure systems and their ratio are (16:51) and (13:25) respectively. Significantly, the analysis identifies the spatial and temporal pattern characteristics of possible physical significance.  相似文献   

Seismic horizontal pullout capacity of shallow vertical anchors in sand     

Jyant Kumar  V. B. K. Mohan Rao 《Geotechnical and Geological Engineering》2004,22(3):331-349

The concept of the equivalent free surface has been extended to determine the seismic horizontal pullout capacity of shallow vertical strip plate anchors buried in sand. The analysis has been done rigorously by using the method of stress characteristics. The results have been expressed in the form of non-dimensional charts. The pullout resistance has been found to reduce quite extensively with increase in the magnitude of horizontal earthquake acceleration. The results were compared with the previously published data, and it was seen that the computed pullout resistance with the proposed method was found to be lowest. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献